ASA Filament 1.75mm Natural 750 gram

  • €20.65
    Inclusive VAT:
    €24.99
    Product Id: 8719189222982
    Availability: In stock
1.75mm - 750 gram: €20.65
2.85mm - 750 gram: €20.65


ASA Filament - Natural / 1.75mm / 750 gram | 3D4Makers.com
Return within 30 days for refund (Refund Policy)
Estimated delivery time *:
  • World: 10 days
  • Europe: 5 days
  • Benelux: 2 days
* Depending on customs

ASA (Acrylonitrile-Styrene-Acrylate) Filament 

The 3D4MAKERS ASA Filament will be delivered in a vacuum packaging in our recyclable box. 

Technical information:

Acrylonitrile-Styrene-Acrylate (ASA) polymers are amorphous and have mechanical properties similar to those of ABS plastics. However, the ASA properties are far less affected by outdoor weathering. The outstanding weather resistance abilities of ASA is due to the acrylic ester elastomer. ASA parts have good chemical and heat resistance, and high impact strength, even at low temperatures. Typical ASA applications are buiding/construction, automotive and recreation parts.

The 3D4MAKERS ASA Filament contains unique properties because the material has an extremely constant diameter and roundness. On top of that the ASA filament does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS ASA Filament particularly suitable for FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

Measurements & Tolerance

Size Diameter tolerance  roundness
1,75 mm Filament +/- 0,05mm 99%
2,85 mm Filament +/- 0,05mm 99%
     
Moisture content < 0,05%  

 

Physical properties

Description Value Test method
Density 1,07 g/cm3 ASTM D792
Melt Mass-Flow Rate (MFR) (220ᵒC/10KG) 12 g/10 min ASTM D1238

Mechanical properties

Description Value Test method
Tensile Stress 47 Mpa ASTM D638
Flexural Modulus 2210 Mpa ASTM D790
Impact strength Notched Izod 180 j/m ASTM D256
Rockwell Hardness (R-Scale) 103 ASTM D785

Printer settings

Description Value
Printer nozzle temperature 240 - 280°C
Heated bed temperature 90 - 110°C

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep.

When the 3D printer is not being used it is important to keep the 3D4MAKERS ASA Filament in a bag and stored in a cool, dry and dark place until it is used again.

Safety information

 COMPOSITION AND INFORMATION ON THE COMPONENTS

 Mixture; This product is a mixture.

CAS-No./EC-No./Index REACH Number Quantity Components Classification        Regulation              (EC) No. 1272/2008

CAS-No. 26299-47-8 EC-No. Polymer

----------

97~100%

Acrylonitrile

Styrene

Acrylate

Not classified

 

Legally Obliged Information

 1 Specific safety, health and environmental regulations and legislation for the substance or mixture.

European inventory of existing commercial chemical substances (EINECS)

The components of this mixture are either included in the EINECS list or exempt.

2 Chemical safety assessment: Does not apply

RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals). The ASA Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.

Environmental information

Plastic waste can damage the environment. 3D misprints must be separated with plastic waste together with the Filament reel. 3D4MAKERS is developing a return system for  3D misprints and the Filament reel.  Together we can protect the environment! 

ASA FILAMENT - Zero warp - Weather/UV resistant - Great Layer Adhesion

Other 3D Printing Filament

Customer Reviews

No reviews yet Write a review

Write a review

I love this product!

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur porttitor aliquam lorem, rhoncus tincidunt massa condimentum nec.