Description
Luvocom® 3F PAHT CF 9891 BK Filament is a high temperature carbon fiber (15%) reinforced polyamide (PA). This grade is PA6 based and is easy to print with low warping and improved layer bonding is optimised for industrial applications. Typical industries where it is commonly used are in robotics, drones, automotive, aerospace and also widely in the field of functional prototypes and end parts. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts, the filament can be used on conventional FFF / FDM 3D printing systems without an heated chamber. This 3D4Makers PAHT CF filament features the following properties:
- Low influence from moisture and temperature to measures and electrical properties
- Designed for industrial applications
- Carbon Fiber Reinforced Material (15%)
- PA6 based material
Material properties
| Description | Value | Test method |
|---|---|---|
| Density | 1,24 g/cm³ | ISO 1183-3 |
| Tensile strength (at 23°C/50% rh) | 130 MPa | ISO 527 |
| Elongation at maximum force |
2 %
|
ISO 527 |
| Modulus of Elasticity (at 23°C/50% rh) | 11,5 GPa | ISO 527 |
| Charpy impact strength | 35 kJ/m² | ISO 179 1eU |
| Heat Distortion Temp. | 90 °C | ISO 75 |
| Continuous service temperature (20.000 h) | 120 °C | EC 60216 |
| Service temperature (during lifetime max. 200h) | 160 °C | / |
|
Insulation resistance strip electrode (R25) |
≤10² Ω | DIN IEC 60167 |
| Surface resistance (ROB) | <10² Ω | DIN IEC 60093 |
Printer recommendations
| Description | Value |
|---|---|
| Printer nozzle temperature | 260 - 290°C |
| Heated bed temperature | 60 - 80°C |
| Print Speed | 40 - 60 mm/s |
| Bed Adhesion |
Magigoo PA on glass or a PEI Sheet |
| Pre drying recommendations |
- 100°C, 4 - 6 hours or 80°C, 12 hours - Profile also available for Drywise In-Line Dryer |
| Extra | We advise to use a adapted nozzle (>0.5mm) for carbon filled filaments |
*Printing profile available in Ultimaker Marketplace
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. When the 3D printer is not being used it is important to keep filament in a bag and stored in a cool, dry and dark place until it is used again.
Documents
|
Printing Guideline (588 KB) |
|
Technical Data Sheet (149 KB) |
 |
Material Safety Data Sheet (224 KB) |
Customer Reviews
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.